Also, the user must remember the following things while using TSync 1.0.
- Tally must be running in the background on the same computer or on the other computer in LAN/WAN/Internet.
- In Tally at least one company must be selected.
- The Tally must show “ODBC Server” in the Calculator window
at the bottom of the Tally as shown in the following screen.
- After starting TSync 1.0 please check whether TSync is not running in DEMO Mode. Also please check Tally is also running in Educational Mode. However the user can test the software with TSync in DEMO Mode or Tally in Educational Mode.
- There are few
adjustments in the TSync 1.0. To map the Tally following screen from
Main>Options Menu. On that screen enter the Server Address and Port Number.
The Server Address refers to the IP Address of the computer on which the Tally
is running (e.g. 192.168.0.1). For the Tally running on the same computer use
the Server Address as 127.0.0.1. For Port Number refer
the Tally Settings. Generally the Tally uses the port number as 9000.
- After stating TSync 1.0
it shows the list of the Selected Companies in the Tally in “Open Companies
List”. The user must select the correct company in which he want to transfer
the data as shown below.
- Also please remember that once the Post Button is clicked the posting process will start to enter the given data in Tally. After that it will not give time to the user to check whether the things are entered properly or not. We strongly advise the User to check the things before clicking the “Post” Button.